Latest mixing machine scrap Tenders | Government mixing machine scrap Tenders

State Government

CTN :40157489

27 Jun, 2025 18.99 Lacs

Jamnagar - Gujarat

Tender For corrigendum : miscellaneous cement concrete, brick work, plaster work and civil work in plant premises at gsecl stps. (as and when required)

Central Government/Public Sector

CTN :40730581

07 Jul, 2025 1.02 Crore

Raipur - Chhattisgarh

Tender For bjc for various natures of rcc dismantling, demolishing, cutting andstrengthening works under retrofitting work of concrete structures atinside plant area of ntpc vindhyachal.

corporations/Associations/Others

CTN :40712440

25 Jun, 2025 15.16 Lacs

Kottayam - Kerala

Tender For supply,installation, testing and commissioning of concrete roof top mounted on grid spv power plant-27kw at ho of pck ltd

State Government

CTN :40691595

24 Jun, 2025 17.31 Lacs

Karaikal - Pondicherry

Tender For supply of material for the work of construction of harvesting structure threshing floor including pucca storage at thiruvettakudy vp in kottucherry commune - collection and supply of fine sand including stacking to standard departmental gauage for pre-measurement at the site as directed by the engineer-in-charge., collection and supply of gravel including stacking to standard departmental gauage for pre-measurement at the site as directed by the engineer-in-charge., collection and supply of portland cement, collection and supply of stone aggregate (single size) :40 mm nominal size including stacking to standard departmental gauage for pre-measurement at the site as directed by the engineer-in-charge., collection and supply of stone aggregate (single size) : 20 mm nominal size including stacking to standard departmental gauage for pre-measurement at the site as directed by the engineer-in-charge., collection and supply of stone aggregate (single size) : 10 mm nominal size including stacking to standard departmental gauage for pre-measurement at the site as directed by the engineer-in-charge., collection and supply of coarse sand (zone iii) including stacking to standard departmental gauage for pre-measurement at the site as directed by the engineer-in-charge., collection and supply of common burnt clay f.p.s (non modular) bricks class designation 3.5, hire charges of wall form panel 1250x500 mm, hire charges of 100mm channel shoulder 2.5m long, hire charges of double clip (bridge clip), hire charges of single clip, hire charges of m.s.tube 40mm dia, supply of twisted steel / deformed tmt bars fe-500d, hire charges of flame retardant face insulating , impregnated fibre board 12mm thick, supply of bitumen hot sealing compound : grade a, supply of bitumen solution primer of approved quality, supply of dehradun white lime, supply of welding by electric plant, supply of mild steel tubes hot finished welded type., supply of red oxide zinc chromate primer, supply of galvanised steel j or l hooks 8mm dia, supply of precoated galvanised iron profile sheet 0.5mm tct, supply of mild steel sheets for tanks, supply of structural steel such as tees, angles channels and r.s.joists, supply of iron pintels including welded pin, supply of mild steel sheets with bolts and nuts to rest on pintels, supply of synthetic enamel paint in black or chocolate shade, supply of plasticizer / super plasticizer, supply of c.i.pile shoe, supply of m.s.clamps for pile shoe, hire charge for loader including operating staff,diesel& lubricant oil etc,complete., hire charge for hydraulic excavator (3d) with driver and fuel including operating staff,diesel& lubricant oil etc,complete., hire charge for vibrator(needle type 40mm) including operating staff,diesel& lubricant oil etc,complete., hire charges of concrete mixer 0.25 to 0.40 cum with hooper including operating staff,diesel & lubricant oil etc,complete., hire charges of diesel road roller 8 to 10 tonne including operating staff,diesel & lubricant oil etc,complete., hire charge of hydraulic piling rig with power unit etc.,complete accessories and shifitin including operating staff,diesel& lubricant oil etc,complete., hire charge for pumping of concrete-h/c of pump, piping work, & accessories etc including operating staff,diesel& lubricant oil etc,complete., hire charge production cost of concrete by batch mix plant(rolling every layer and top-most layer ) including operating staff,diesel& lubricant oil etc,complete., supply and fixing of r.c.c. precast citizen name board size of 3.5 feet breadth, 6.00 feetheight and 2 inches thick with painting, drawing work, lettering the name board work. the rate includingcost of 1:2:4 p.c.c., earth work and refilling for fixing of post, loading unloading and transport charges etc.,complete as per the standard drawing of mord. mgnrega

CTN :40461452

20 Jun, 2025 NA

Chennai - Tamil Nadu

Tender For corrigendum : concrete pavement works for enabling replacement of various ug pipelines at plant 1 (group-1) and plant 212 (group-2) at cpcl manalii

CTN :40627871

18 Jun, 2025 37.84 Lacs

Jhajha - Bihar

Tender For mr-n-24-25- jhajha-01 (kiyajori to jogiyatilha) - kiyajori to jogiyatilha clearing and grubbing road land (by manual means) including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth upto 300mm, removals of stumps of such trees cut earlier & disposal of unserviceable materials & stacking of serviceable materials to be used or auctioned upto a lead of 1000 m including removal and disposal of top organic soil not exeeding 150mm in thickness as per technical specification clause 201.1 and direction of e/i, construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of table 300.2 with lead upto 100 m as per technical specification clause 303.1., for 100 m lead @ 80 %, for 100 m lead @ 20 %, construction of granular sub-base by providing well graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at omc, and compacting with smooth wheel roller to achieve the desired density, complete as per technical specification clause 401., providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with three wheel 80-100 kn static roller in stages to proper grade and camber, applying and brooming, crushable screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density grading 2 as per technical specification clause 405., providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 kn in stages to proper grade and camber, applying and brooming, stone screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density grading 3 as per technical specification clause 405., providing and applying primer coat with bitumen emulsion (ss-1) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70- 1.0 kg/sqm using mechanical means as per technical specification clause 502., providing and applying tack coat with bitumen emulsion using emulsion pressure distributor at the rate of 0.25 to 0.30 kg per sqm on the prepared granular surface tretaed with primer and clened with hydriloc broom as per technical specification aclouse 503., providing and laying semi dense bituminous concrete with 100-120 tph batch type hmp producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder @ 4.5 to 5 per cent of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per morth specification clause no. 508 complete in all respects., construction of dry lean concrete sub base over a prepared sub grade with coarse and fine aggregate conforming to is 383 , the size of coarse agg. not exceeding 25mm , agg. cememt ratio not to exceed 15:1, aggregate gradation after blending to be as per table 600-1 , cement content not to be less than 150kg/cm, opc to be determined during trial length construction, concrete strength not to be less than 10 mpa at 7 days, mixed in a batching plant , trasported to site, laid with a paver with electronic sensor , compacting with 8-10 tonnes vibrartory roller, finishing and curing., construction of panel concrete ,plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per caluse 1501.2.2 m 30(grade) coarse and fine aggregates conforming to is:383, maximum s

CTN :40646727

15 Jun, 2025 7.33 Lacs

Channagiri - Karnataka

Tender For material procurement for construction of canal from n v gangadarappas farm to clean drinking water plant in honnemaradahalli village in channagiri taluk - nugcanal spall (jelly used for packing), nugcanal watering charges at 1 % on material, nugcanal mixer (concrete) - 1 cum capacity, nugcanal 1200 mm dia rcc pipe np3 pipe including collar at site, nugcanal tmt bars fe 500, nugcanal broken stone aggregate 40 mm size, nugcanal broken stone aggregate 20 mm size, nugcanal broken stone aggregate 12 mm to 10 mm size, nugcanal boulders, nugcanal formwork, centering & scaffolding for beams & lintels of building, nugcanal binding wire, nugcanal plasticizer / super plasticizer, nugcanal display board / cib, nugcanal coarse sand (zone iii), nugcanal portland cement

CTN :40661662

17 Jun, 2025 10.89 Lacs

Vijayapura - Karnataka

Tender For supply of material requirement for hittnalli gp, construction of a santhe katte near anaveera lingeshwara mutt at hitnalli village in hittnalli gp in devara hipparagi tq - hittnalligp-01 mr9433 broken stone aggregate 40 mm size, hittnalligp-01 mr9432 broken stone aggregate 20 mm size, hittnalligp-01 mr9431 broken stone aggregate 12 mm to 10 mm size, hittnalligp-01 982 coarse sand (zone iii), hittnalligp-01 367 portland cement, hittnalligp-01 mr9678 mixer (concrete) - 1 cum capacity, hittnalligp-01 mr9554 tmt bars fe 500, hittnalligp-01 7335 binding wire, hittnalligp-01 7318 plasticizer or super plasticizer, hittnalligp-01 mr9675 hom of vibrator 0.71 days, hittnalligp-01 mr9528 rubble stones, hittnalligp-01 mr9424 bond stone 20 x 20 x 45 cm, hittnalligp-01 mr9677 mixer (concrete small used in culvert), hittnalligp-01 mr9471 granite metal 40 mm, hittnalligp-01 mr9470 granite metal 20 mm, hittnalligp-01 mr9909 coarse aggreages 12 mm, hittnalligp-01 mr9899 6 mm and below aggreages, hittnalligp-01 mr9923 grit or stone dust, hittnalligp-01 mr9590 wet mix plant (pug mill), hittnalligp-01 mr9873 generator 100 kva, hittnalligp-01 mr9573 front end loader 1 cum capacity, hittnalligp-01 mr9876 paver finisher mechanical 100 tph capacity, hittnalligp-01 mr9683 vibratory roller 8 tonne, hittnalligp-01 mr9684 water tanker, hittnalligp-01 mr9692 tipper 5 cum capacity, hittnalligp-01 mr9910 cobble stones of 75mm thick, hittnalligp-01 mr9725 mason class i (with tools), hittnalligp-01 mr9680 plate vibrator having 3 ton compaction force, hittnalligp-01 mr9558 vitrified tiles 10 mm thick 600 x 600 mm, hittnalligp-01 mr9418 adhesive for tiles, hittnalligp-01 mr9477 grout for vitrified tiles, hittnalligp-01 mr9539 spacers for vitrified tiles, hittnalligp-01 mr9532 sealer for vitrified tiles, hittnalligp-01 mr9934 ms angle iron 50mm x 50mm x 6mm, 33.8 metre in length at 4.5 kg per metre, hittnalligp-01 mr9933 ms angle iron 40mm x 40mm x 6mm, 23 metre in length at 3.5 kg per metre, hittnalligp-01 mr9925 gusset plates 6 mm thick, hittnalligp-01 mr9903 base plate base plate, hittnalligp-01 mr9900 anchor bolts 750mm, hittnalligp-01 mr9455 corbon electrodes, hittnalligp-01 mr9607 welder grade i, hittnalligp-01 mr9676 hom of welding and grinding machine, hittnalligp-01 mr9672 hom of cutting and grinding machine, hittnalligp-01 mr9522 ready mix primer paint (ready mix red lead paint), hittnalligp-01 mr9690 painter class i, hittnalligp-01 mr9463 enamel metal paint, hittnalligp-01 mr9688 unit cost as per the specification, hittnalligp-01 851 water proofing cement paint

Central Government/Public Sector

CTN :40610919

16 Jun, 2025 NA

Bhopal - Madhya Pradesh

Tender For repair, maintenance, and installation of plant/ systems/equipments (version 2)-g-schedule for pre monsoon repair & maintenance of g.d. site at sandalpur the. khategaon, dist. dewas for the year of 2025-26- 1 ordinary shrub jungle (area below 25% covered by shrubs) clearance involving removal of grass, shrubs, bushes and twigs including rooting out & disposal etc. complete. (wrd sor 9.01/p. 133) 53000 sqm., 2 fly levelling for fixing temporary bench marks (wrd sor 1.08/p.8) 2 k.m., 3 chain and compass survey (wrd sor 1.06/p. 8) for headworks (wrd sor 1.06.1) 1.5 k.m., 4 levelling for canal works (wrd sor 1.10/p. 8-9) below 15 m interval for command survey and canal survey, including survey for c.d. work (wrd sor 1.10.1) 2.5 k.m. 0 0 5 maintenance of gravel road including making up the loss of profile, rectifying corrugated surface, filling up of depressions, pot holes and erosion gullies by adding fresh material and compacting it with appropriate equipment or to strip excess of material from the road surface as per drawings and technical specification clause 1906 (mprrda sor 15.4) rate per sqm for depression upto 7.5 cm 5500 sqm. 0 0 6 fencing with r.c.c. post placed at required distance, embedded in cement concrete blocks, every 15th post, last but one end post and corner post shall be strutted on both sides and end post one side only, provided with horizontal lines and two diagonals of barbed wire weighing 9.38 kg per 100 metres (minimum) between the two posts fitted and fixed with g.i. staples on wooden plugs or g.i. binding wire tied to 6 mm bar nibs fixed while casting the post (cost of r.c.c. posts, struts, earth work and concrete to be paid for separately) with gi barbed wire. (pwd sor 10.31/ 312) 1050 m. 0 0 7 demolishing cement concrete manually/by mechanical means including disposal of material within 50 metres lead as per direction of engineer -in - charge. (pwd sor item no. 15.2/p. 523) nominal concrete 1:3:6 or richer mix (i/c equivalent design mix). (pwd sor item no. 15.2.1/p. 523) 4.55 cum. 0 0 8 fabrication and installation of reinforcement cement concrete gauge post of size 15 cm x 10 cm (one side tapered in 5 cm length) made with m - 15 concrete mix (with aggregate 20 mm nominal size) 1.80 m long. at river banks including cost of civil works in foundation embedded in m -15 reinforced cement concrete pedestal block of size 60 cm x 60cm x 60 cm including the of steel reinforcement, centring, shuttering, finishing, reinforcement over the m -7.5 (with aggregate 40 mm nominal size) cement concrete base of size 80 cm x 80 cm x 15 cm with 12 mm thick plastering complete and marking the gauge with synthetic enamel with standard metric gradation of 5 mm thickness in black & white alternately & red synthetic enamel of 5 mm width at every 100 mm etc complete (center line) (wrd sor 1.30/p. 13) 26 each 0 0 9 providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work upto plinth level : (pwd sor 4.1/p. 40) m-15 grade concrete (4.1.1.3) 14.76 cum. 0 0 10 providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by engineer -in - charge) 0.50 mm + 0.05 %, total coated thicknesswith zinc coating 120 gsm as per is: 277 in 240 mpa steel grade, 5 -7 micronsepoxy primer on both side of the sheet and polyester top coat 15 -18 microns. sheet should have protective guard film of 25 microns minimum to avoid scratches while transportation and should be supplied in single length upto 12 metre or as desired by engineer -in - charge. the sheet shall be fixed using self-drilling /selftapping screws of size (5.5x 55mm) with epdm seal, complete upto any pitch in horizontal/ vertical or curved surfaces excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. (pwd sor item no. 24.11/p. 725 -726) 34 sqm. 0 0 11 providing and fixing precoatedgalvanised steel